Secabo C40 Spécifications télécharger pdf (Page 4)

4. Installation and Test

4.1. Setting up the cutting plotter

Make sure that there is enough space to allow unhindered media input and output at the front

and rear of the cutting plotter. The operating environment for the cutting plotter must be clean

and dry.

• Attach the plotter to a 200V mains power supply using the supplied power lead.

• Now switch the cutting plotter on. Caution – when the cutting plotter is switched on the cutting

head automatically moves to the right.

4.2. Installing the plotter driver

To use the cutting plotter with CorelDraw or Freehand, you first need to install the plotter as a printer on

your computer system. The printer driver is located on the supplied CD. Simply run the driverSecabo.exe

file in the printer driver directory. When installing the cutting plotter, you must select the interface you will

be using.

After installing the printer driver, you can plot jobs directly from CorelDraw, Freehand or Adobe Illustrator

(Version 11 or newer) on your Secabo Cutting Plotter by selecting File - Print.

4.3. Using Artcut

The Artcut cutting software is available as an option with your Secabo Cutting Plotter. Please refer to the

Artcut User Manual for information on installing and using the software.

4.4. Fitting and adjusting knives

• Take one of the cutter knives provided, and insert it into the knife holder so that the blade protrudes

from the front.

• Now adjust the cutting depth by turning the silver-colored screw at the top of the knife holder.

• The depth is set correctly when you feel a light scratching on carefully rubbing your fingertip over

the tip of the knife. As the knife depth setting depends on the media you will be cutting, you may

need to re-adjust later.

• Tighten the brass screw to lock the knife setting.

• You can press the pin at the rear of the knife holder to remove and replace the blade you have

inserted at any time. Caution – danger of injury! 4

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Secabo C40 Spécifications Page 4